The plastics for composites market is expected to grow from US$ 23,337.24 million in 2022 to US$ 30,490.85 million by 2028; it is estimated to record a CAGR of 4.6% from 2022 to 2028.
Composites are materials that consist of two or more chemically and physically different phases separated by a distinct interface. Most commercially produced composites use a polymer matrix material, often called a resin solution. Commonly used polymer matrices include polyester, vinyl ester, epoxy, phenolic, polyimide, polyamide, polypropylene, and polyether ether ketone (PEEK). Low cost, easy processability, good chemical resistance, and low specific gravity are among the major advantages associated with polymer matrices.
The increasing uptake of composite resins in building & construction activities, and aerospace and military applications is contributing to the plastics for composites market growth. In addition, the demand for lightweight materials in vehicle manufacturing, to improve fuel efficiency, is another factor propelling the expansion of the market. Further, the rising demand for thermoplastic resins is contributing significantly to the overall plastic for composites market growth. Rigid fibers and more heat resistance, crack resistance, high strike resistance, and tough polymer matrix are the major characteristics of polymer composites that drive their popularity. Increasing investments in renewable energy generation are likely to trigger the demand for polymer composites over the coming years.
Customize Research To Suit Your Requirement
We can optimize and tailor the analysis and scope which is unmet through our standard offerings. This flexibility will help you gain the exact information needed for your business planning and decision making.
Plastics for Composites Market: Strategic Insights
Market Size Value in US$ 23,337.24 Million in 2022 Market Size Value by US$ 30,490.85 Million by 2028 Growth rate CAGR of 4.6% from 2022 to 2028 Forecast Period 2022-2028 Base Year 2022
Shejal
Have a question?
Shejal will walk you through a 15-minute call to present the report’s content and answer all queries if you have any.
Speak to Analyst
Customize Research To Suit Your Requirement
We can optimize and tailor the analysis and scope which is unmet through our standard offerings. This flexibility will help you gain the exact information needed for your business planning and decision making.
Plastics for Composites Market: Strategic Insights
| Market Size Value in | US$ 23,337.24 Million in 2022 |
| Market Size Value by | US$ 30,490.85 Million by 2028 |
| Growth rate | CAGR of 4.6% from 2022 to 2028 |
| Forecast Period | 2022-2028 |
| Base Year | 2022 |
Shejal
Have a question?
Shejal will walk you through a 15-minute call to present the report’s content and answer all queries if you have any.
Speak to Analyst
Plastics for Composites Market Forecast, by Region, 2021–2028
- Sample PDF showcases the content structure and the nature of the information with qualitative and quantitative analysis.
- Request discounts available for Start-Ups & Universities
Market Insights
Increasing Demand from Automotive and Aerospace Industries Drives Plastics for Composites Market Growth
The composite resin is utilized in various applications, including construction and infrastructure, transportation, electrical & electronics, wind energy, pipelines and tanks, marine, and aerospace & military. Advanced materials are crucial for boosting the fuel economy of modern automobiles while ensuring safety and performance. Since it takes less energy to accelerate lighter objects than heavier ones, lightweight materials offer excellent potential for increasing vehicle efficiency. Therefore, high demand for composites from the automotive industry for the manufacturing of fuel-efficient, lightweight vehicles drives the plastics for composites market growth. End-use industries in emerging economies, such as China and India, are the major contributors to the rising demand for plastics for composites. The increasing need for lighter-weight materials to construct aviation components and parts has been another significant factor contributing to the growth of the plastics for composites market. Aircraft manufacturers are making efforts to enlarge primary thermoplastic structures in business jets and commercial aircraft. They have been the early adopters of long fiber-reinforced thermoplastics.
Type Insights
Based on type, the plastics for composites market is segmented into thermoset (polyester, vinyl ester, epoxy, polyurethane, and others) and thermoplastic (polypropylene, polyethylene, polyvinyl chloride, polystyrene, polyethylene terephthalate, polycarbonate, and others). The thermoset segment held a larger share of the market in 2021. Thermoset is a popular polymer matrix material for fiber-reinforced composites. Common examples of thermosets include epoxies and polyesters. They are among the major types of matrix systems, specifically used in the aerospace industry. Thermoset matrix composites are more extensively used than thermoplastic matrix composites due to their lower viscosity at relatively low temperatures (less than 100°C), which better facilitates the resin/fiber wetting process. These factors are expected to drive the growth of the market for thermoset matrix components.
Plastics for Composite Market, by Type – 2021–2028
- Sample PDF showcases the content structure and the nature of the information with qualitative and quantitative analysis.
- Request discounts available for Start-Ups & Universities
Lanxess AG, Covestro AG, Celanese Corp, INEOS Group Holdings SA, Daicel Corp, BASF SE, Evonik Industries AG, Solvay SA, Saudi Basic Industries Corp, and Arkema SA are among the key players operating in the plastics for composites market. The leading players adopt strategies such as mergers and acquisitions, and product launches to expand their geographic presence and consumer base. For instance, in June 2022, Lanxess AG launched a composite with polyamide 6 matrix based on “green” cyclohexane.
Report Spotlights
- Progressive trends in the plastics for composites industry to help players develop effective long-term strategies
- Business growth strategies adopted by companies to secure growth in developed and developing markets
- Quantitative analysis of the global plastics for composites market from 2020 to 2028
- Estimation of the demand for plastics for composites across various industries
- Porter's Five Forces analysis to illustrate the efficacy of buyers and suppliers operating in the plastics for the composites industry
- Recent developments to understand the competitive market scenario and demand for plastics for composites
- Market trends and outlook, and factors governing the growth of the plastics for composites market
- Enlightening strategies that underpin commercial interest concerning the market growth, aiding in the decision-making process
- Plastics for composites market size at various nodes of market
- Detailed overview and segmentation of the market, as well as its industry dynamics
- Plastics for composites market size in various regions with promising growth opportunities
The "Plastics for Composites Market Analysis to 2028" is a specialized and in-depth study of the chemicals and materials industry, focusing on the plastics for composites market trend analysis. The report aims to provide an overview of the market with detailed segmentation. The plastics for composites market is segmented on the basis of type, technology, and geography. Based on the type, the market is segmented into thermoset (polyester, vinyl ester, epoxy, polyurethane, and others) and thermoplastic (polypropylene, polyethylene, polyvinyl chloride, polystyrene, polyethylene terephthalate, polycarbonate, and others). Based on technology, the market is segmented into injection molding, compression molding, pultrusion, resin infusion, and others. In terms of geography, the market is segmented into five main regions—North America, Europe, Asia Pacific, the Middle East & Africa, and South & Central America. In 2021, Asia Pacific dominated the plastics for composites market. The region is expected to register the highest CAGR in the market during the forecast period. The automotive and construction industries in Asia Pacific are growing at a rapid pace. It is the most populated region in the world, and the region hosts one of the world's most rapidly developing construction industries. These factors contribute to a high demand for plastics for composites in Asia Pacific.
Report Coverage
Revenue forecast, Company Analysis, Industry landscape, Growth factors, and Trends
Segment Covered
Type, and Technology
Regional Scope
North America, Europe, Asia Pacific, Middle East & Africa, South & Central America
Country Scope
Argentina, Australia, Brazil, Canada, China, France, Germany, India, Italy, Japan, Mexico, Russian Federation, Saudi Arabia, South Africa, South Korea, United Arab Emirates, United Kingdom, United States
Frequently Asked Questions
The major players operating in the plastics for composites market are Lanxess AG, Covestro AG, Celanese Corp, INEOS Group Holdings SA, Daicel Corp, BASF SE, Evonik Industries AG, Solvay SA, Saudi Basic Industries Corp, and Arkema SA.
In 2021, Asia-Pacific accounted for the largest share of the global plastics for composites market. Growing demand from construction, wind power, electronics, and automotive industries led to the dominance of the Asia Pacific region in 2021.
In 2021, the thermoset segment held the largest market share. Increased use of thermoset plastic in the aerospace and automobile industry due to their lower viscosity at relatively low temperatures (less than 100°C), which better facilitates the resin/fiber wetting process led to the dominance of the thermoset segment in the plastics for composites market.
During the forecast period, the compression molding segment is expected to be the fastest-growing segment. The manufacture of various parts of electronic and automotive products has increased due to the increased demand for automotive and electrical products, particularly vehicles, mobile phones and tablets. The compression molding process is primarily used in the fabrication of these parts. These factors are expected to accelerate the growth of the compression molding segment of the plastics for composites market.
During the forecast period, thermoplastic is expected to be the fastest-growing segment. The growing adoption of thermoplastic within the automotive industry, rising demand for recyclable and fast-curing materials, increasing demand for automobiles, and growing penetration of composite materials by replacing metals are significant factors boosting the growth of the thermoplastic segment in plastics for composites market demand during the forecast period.
The increasing utilization of plastics for composites in building & construction activity, aerospace, and military applications are some of the key factors that contribute to the growth of the market. In addition, the demand for lightweight materials from transportation, which in response improves the efficiency of fuel, is another factor propelling the expansion of the market. These factors are driving the plastics for composites market growth.
1. Introduction
1.1 Study Scope
1.2 The Insight Partners Research Report Guidance
1.3 Market Segmentation
1.3.1 Plastics for Composites Market, by Type
1.3.2 Plastics for Composites Market, by Technology
1.3.3 Plastics for Composites Market, by Geography
2. Key Takeaways
3. Research Methodology
3.1 Scope of the Study
3.2 Research Methodology
3.2.1 Data Collection:
3.2.2 Primary Interviews:
3.2.3 Hypothesis formulation:
3.2.4 Macro-economic factor analysis:
3.2.5 Developing base number:
3.2.6 Data Triangulation:
3.2.7 Country level data:
4. Plastics for Composites Market Landscape
4.1 Market Overview
4.2 Porter's Five Forces Analysis
4.3 Ecosystem Analysis
4.4 Expert Opinion
5. Plastics for Composites Market – Key Market Dynamics
5.1 Market Drivers
5.1.1 Growing Demand for Lightweight Materials in Aerospace and Automotive Industries
5.1.2 Flourishment of Construction Industry
5.2 Market Restraints
5.2.1 Issues Related to Recycling of Thermoset Plastics
5.3 Market Opportunities
5.3.1 Applications of Plastic-Based Composites in Wind Energy Sector
5.4 Future Trends
5.4.1 Application of Bio-Based Plastics for Composites
5.5 Impact Analysis
6. Plastics for Composites – Global Market Analysis
6.1 Plastics for Composites Market Overview
6.2 Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
6.3 Market Positioning – Plastics for Composites Market Players
7. Plastics for Composites Market Analysis – By Type
7.1 Overview
7.2 Plastics for Composites Market, By Type (2021 and 2028)
7.3 Thermoset
7.3.1 Overview
7.3.2 Thermoset: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.3.3 Polyester
7.3.3.1 Overview
7.3.3.2 Polyester: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.3.4 Vinyl Ester
7.3.4.1 Overview
7.3.4.2 Vinyl Ester: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.3.5 Epoxy
7.3.5.1 Overview
7.3.5.2 Epoxy: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.3.6 Polyurethane
7.3.6.1 Overview
7.3.6.2 Polyurethane: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.3.7 Others
7.3.7.1 Overview
7.3.7.2 Others: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.4 Thermoplastic
7.4.1 Overview
7.4.2 Thermoplastic: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.4.3 Polypropylene
7.4.3.1 Overview
7.4.3.2 Polypropylene: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.4.4 Polyethylene
7.4.4.1 Overview
7.4.4.2 Polyethylene: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.4.5 Polyvinylchloride
7.4.5.1 Overview
7.4.5.2 Polyvinylchloride: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.4.6 Polystyrene
7.4.6.1 Overview
7.4.6.2 Polystyrene: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.4.7 Polyethylene Terephthalate
7.4.7.1 Overview
7.4.7.2 Polyethylene Terephthalate: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.4.8 Polycarbonate
7.4.8.1 Overview
7.4.8.2 Polycarbonate: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
7.4.9 Others
7.4.9.1 Overview
7.4.9.2 Others: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
8. Plastics for Composites Market Analysis – By Technology
8.1 Overview
8.2 Plastics for Composites Market, By Technology (2021 and 2028)
8.3 Injection Molding
8.3.1 Overview
8.3.2 Injection Molding: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
8.4 Compression Molding
8.4.1 Overview
8.4.2 Compression Molding: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
8.5 Pultrusion
8.5.1 Overview
8.5.2 Pultrusion: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
8.6 Resin Infusion
8.6.1 Overview
8.6.2 Resin Infusion: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
8.7 Others
8.7.1 Overview
8.7.2 Others: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9. Plastics for Composites Market – Geographic Analysis
9.1 Overview
9.2 North America: Plastics for Composites Market
9.2.1 North America: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.2.2 North America: Plastics for Composites Market, By Type
9.2.3 North America: Plastics for Composites Market, By Technology
9.2.4 North America: Plastics for Composites Market, by Key Country
9.2.4.1 US: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9.2.4.1.1 US: Plastics for Composites Market, By Type
9.2.4.1.2 US: Plastics for Composites Market, By Technology
9.2.4.2 Canada: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9.2.4.2.1 Canada: Plastics for Composites Market, By Type
9.2.4.2.2 Canada: Plastics for Composites Market, By Technology
9.2.4.3 Mexico: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9.2.4.3.1 Mexico: Plastics for Composites Market, By Type
9.2.4.3.2 Mexico: Plastics for Composites Market, By Technology
9.3 Europe: Plastics for Composites Market
9.3.1 Europe: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.3.2 Europe: Plastics for Composites Market, By Type
9.3.3 Europe: Plastics for Composites Market, By Technology
9.3.4 Europe: Plastics for Composites Market, by Key Country
9.3.4.1 Germany: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9.3.4.1.1 Germany: Plastics for Composites Market, By Type
9.3.4.1.2 Germany: Plastics for Composites Market, By Technology
9.3.4.2 France: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9.3.4.2.1 France: Plastics for Composites Market, By Type
9.3.4.2.2 France: Plastics for Composites Market, By Technology
9.3.4.3 Italy: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9.3.4.3.1 Italy: Plastics for Composites Market, By Type
9.3.4.3.2 Italy: Plastics for Composites Market, By Technology
9.3.4.4 UK: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9.3.4.4.1 UK: Plastics for Composites Market, By Type
9.3.4.4.2 UK: Plastics for Composites Market, By Technology
9.3.4.5 Russia: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9.3.4.5.1 Russia: Plastics for Composites Market, By Type
9.3.4.5.2 Russia: Plastics for Composites Market, By Technology
9.3.4.6 Rest of Europe: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9.3.4.6.1 Rest of Europe: Plastics for Composites Market, By Type
9.3.4.6.2 Rest of Europe: Plastics for Composites Market, By Technology
9.4 Asia Pacific: Plastics for Composites Market
9.4.1 Asia Pacific: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.4.2 Asia Pacific: Plastics for Composites Market, By Type
9.4.3 Asia Pacific: Plastics for Composites Market, by Technology
9.4.4 Asia Pacific: Plastics for Composites Market, by Key Country
9.4.4.1 Australia: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.4.4.1.1 Australia: Plastics for Composites Market, By Type
9.4.4.1.2 Australia: Plastics for Composites Market, by Technology
9.4.4.2 China: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.4.4.2.1 China: Plastics for Composites Market, By Type
9.4.4.2.2 China: Plastics for Composites Market, by Technology
9.4.4.3 India: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.4.4.3.1 India: Plastics for Composites Market, by Type
9.4.4.3.2 India: Plastics for Composites Market, by Technology
9.4.4.4 Japan: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.4.4.4.1 Japan: Plastics for Composites Market, By Type
9.4.4.4.2 Japan: Plastics for Composites Market, by Technology
9.4.4.5 South Korea: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.4.4.5.1 South Korea: Plastics for Composites Market, By Type
9.4.4.5.2 South Korea: Plastics for Composites Market, by Technology
9.4.4.6 Rest of Asia Pacific: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.4.4.6.1 Rest of Asia Pacific: Plastics for Composites Market, By Type
9.4.4.6.2 Rest of Asia Pacific: Plastics for Composites Market, by Technology
9.5 South and Central America: Plastics for Composites Market
9.5.1 South and Central America: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.5.2 South and Central America: Plastics for Composites Market, By Type
9.5.3 South and Central America: Plastics for Composites Market, by Technology
9.5.4 South and Central America: Plastics for Composites Market, by Key Country
9.5.4.1 Brazil: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9.5.4.1.1 Brazil: Plastics for Composites Market, By Type
9.5.4.1.2 Brazil: Plastics for Composites Market, by Technology
9.5.4.2 Argentina: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9.5.4.2.1 Argentina: Plastics for Composites Market, By Type
9.5.4.2.2 Argentina: Plastics for Composites Market, by Technology
9.5.4.3 Rest of South and Central America: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
9.5.4.3.1 Rest of South and Central America: Plastics for Composites Market, By Type
9.5.4.3.2 Rest of South and Central America: Plastics for Composites Market, by Technology
9.6 Middle East and Africa: Plastics for Composites Market
9.6.1 Middle East and Africa: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.6.2 Middle East and Africa: Plastics for Composites Market, By Type
9.6.3 Middle East and Africa: Plastics for Composites Market, by Technology
9.6.4 Middle East and Africa: Plastics for Composites Market, by Key Country
9.6.4.1 South Africa: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.6.4.1.1 South Africa: Plastics for Composites Market, By Type
9.6.4.1.2 South Africa: Plastics for Composites Market, by Technology
9.6.4.2 UAE: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.6.4.2.1 UAE: Plastics for Composites Market, By Type
9.6.4.2.2 UAE: Plastics for Composites Market, by Technology
9.6.4.3 Saudi Arabia: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.6.4.3.1 Saudi Arabia: Plastics for Composites Market, By Type
9.6.4.3.2 Saudi Arabia: Plastics for Composites Market, by Technology
9.6.4.4 Rest of Middle East and Africa: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
9.6.4.4.1 Rest of Middle East and Africa: Plastics for Composites Market, by Type
9.6.4.4.2 Rest of Middle East and Africa: Plastics for Composites Market, by Technology
10. Impact of COVID-19 Pandemic on Global Plastics for Composites Market
10.1 Overview
10.2 Impact of COVID-19 on Plastics for Composites Market
10.3 North America: Impact Assessment of COVID-19 Pandemic
10.4 Europe: Impact Assessment of COVID-19 Pandemic
10.5 Asia Pacific: Impact Assessment of COVID-19 Pandemic
10.6 Middle East & Africa: Impact Assessment of COVID-19 Pandemic
10.7 South and Central America: Impact Assessment of COVID-19 Pandemic
11. Industry Landscape
11.1 Product Launch
11.2 Expansion
11.3 Partnership
11.4 Mergers and Acquisitions
12. Company Profiles
12.1 Lanxess AG
12.1.1 Key Facts
12.1.2 Business Description
12.1.3 Products and Services
12.1.4 Financial Overview
12.1.5 SWOT Analysis
12.1.6 Key Developments
12.2 Covestro AG
12.2.1 Key Facts
12.2.2 Business Description
12.2.3 Products and Services
12.2.4 Financial Overview
12.2.5 SWOT Analysis
12.2.6 Key Developments
12.3 Celanese Corp
12.3.1 Key Facts
12.3.2 Business Description
12.3.3 Products and Services
12.3.4 Financial Overview
12.3.5 SWOT Analysis
12.3.6 Key Developments
12.4 INEOS Group Holdings SA
12.4.1 Key Facts
12.4.2 Business Description
12.4.3 Products and Services
12.4.4 Financial Overview
12.4.5 SWOT Analysis
12.4.6 Key Developments
12.5 Daicel Corp
12.5.1 Key Facts
12.5.2 Business Description
12.5.3 Products and Services
12.5.4 Financial Overview
12.5.5 SWOT Analysis
12.5.6 Key Developments
12.6 BASF SE
12.6.1 Key Facts
12.6.2 Business Description
12.6.3 Products and Services
12.6.4 Financial Overview
12.6.5 SWOT Analysis
12.6.6 Key Developments
12.7 Evonik Industries AG
12.7.1 Key Facts
12.7.2 Business Description
12.7.3 Products and Services
12.7.4 Financial Overview
12.7.5 SWOT Analysis
12.7.6 Key Developments
12.8 Solvay SA
12.8.1 Key Facts
12.8.2 Business Description
12.8.3 Products and Services
12.8.4 Financial Overview
12.8.5 SWOT Analysis
12.8.6 Key Developments
12.9 Saudi Basic Industries Corp
12.9.1 Key Facts
12.9.2 Business Description
12.9.3 Products and Services
12.9.4 Financial Overview
12.9.5 SWOT Analysis
12.9.6 Key Developments
12.10 Arkema SA
12.10.1 Key Facts
12.10.2 Business Description
12.10.3 Products and Services
12.10.4 Financial Overview
12.10.5 SWOT Analysis
12.10.6 Key Developments
13. Appendix
13.1 About The Insight Partners
13.2 Glossary of Terms
LIST OF TABLES
Table 1. Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
Table 2. Plastics for Composites Market, by Type – Revenue and Forecast to 2028 (US$ Million)
Table 3. Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 4. North America Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 5. North America Plastics for Composites Market, By Technology – Revenue and Forecast to 2028 (US$ Million)
Table 6. US Plastics for Composites Market, Type – Revenue and Forecast to 2028 (US$ Million)
Table 7. US Plastics for Composites Market, Technology – Revenue and Forecast to 2028 (US$ Million)
Table 8. Canada Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 9. Canada Plastics for Composites Market, By Technology – Revenue and Forecast to 2028 (US$ Million)
Table 10. Mexico Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 11. Mexico Plastics for Composites Market, By Technology – Revenue and Forecast to 2028 (US$ Million)
Table 12. Europe: Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 13. Europe: Plastics for Composites Market, By Technology – Revenue and Forecast to 2028 (US$ Million)
Table 14. Germany Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 15. Germany Plastics for Composites Market, By Technology – Revenue and Forecast to 2028 (US$ Million)
Table 16. France Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 17. France Plastics for Composites Market, By Technology – Revenue and Forecast to 2028 (US$ Million)
Table 18. Italy Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 19. Italy Plastics for Composites Market, By Technology – Revenue and Forecast to 2028 (US$ Million)
Table 20. UK Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 21. UK Plastics for Composites Market, By Technology – Revenue and Forecast to 2028 (US$ Million)
Table 22. Russia Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 23. Russia Plastics for Composites Market, By Technology – Revenue and Forecast to 2028 (US$ Million)
Table 24. Rest of Europe Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 25. Rest of Europe Plastics for Composites Market, By Technology – Revenue and Forecast to 2028 (US$ Million)
Table 26. Asia Pacific Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 27. Asia Pacific Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 28. Australia Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 29. Australia Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 30. China Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 31. China Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 32. India Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 33. India Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 34. Japan Plastics for Composites Market, By Type– Revenue and Forecast to 2028 (US$ Million)
Table 35. Japan Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 36. South Korea Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 37. South Korea Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 38. Rest of Asia Pacific Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 39. Rest of Asia Pacific Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 40. South and Central America Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 41. South and Central America Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 42. Brazil Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 43. Brazil Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 44. Argentina Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 45. Argentina Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 46. Rest of South and Central America Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 47. Rest of South and Central America Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 48. Middle East and Africa Plastics for Composites Market, By Type– Revenue and Forecast to 2028 (US$ Million)
Table 49. Middle East and Africa Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 50. South Africa Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 51. South Africa Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 52. UAE Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 53. UAE Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 54. Saudi Arabia Plastics for Composites Market, By Type – Revenue and Forecast to 2028 (US$ Million)
Table 55. Saudi Arabia Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 56. Rest of Middle East and Africa Plastics for Composites Market, by Type – Revenue and Forecast to 2028 (US$ Million)
Table 57. Rest of Middle East and Africa Plastics for Composites Market, by Technology – Revenue and Forecast to 2028 (US$ Million)
Table 58. Glossary of Terms, Global Plastics for Composites Market
LIST OF FIGURES
Figure 1. Plastics for Composites Market Segmentation
Figure 2. Plastics for Composites Market Segmentation – By Geography
Figure 3. Global Plastics for Composites Market Overview
Figure 4. Global Plastics for Composites Market, By Type
Figure 5. Global Plastics for Composites Market, by Geography
Figure 6. Global Plastics for Composites Market, Industry Landscape
Figure 7. Porter's Five Forces Analysis
Figure 8. Ecosystem: Plastics for Composites Market
Figure 9. Expert Opinion
Figure 10. Global Plastics for Composites Market Impact Analysis of Drivers and Restraints
Figure 11. Geographic Overview of Plastics for Composites Market
Figure 12. Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 13. Plastics for Composites Market Revenue Share, By Type (2021 and 2028)
Figure 14. Thermoset: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 15. Polyester: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 16. Vinyl Ester: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 17. Epoxy: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 18. Polyurethane: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 19. Others: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 20. Thermoplastic: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 21. Polypropylene: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 22. Polyethylene: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 23. Polyvinylchloride: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 24. Polystyrene: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 25. Polyethylene Terephthalate: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 26. Polycarbonate: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 27. Others: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 28. Plastics for Composites Market Revenue Share, By Technology (2021 and 2028)
Figure 29. Injection Molding: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 30. Compression Molding: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 31. Pultrusion: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 32. Resin Infusion: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 33. Others: Plastics for Composites Market – Revenue and Forecast To 2028 (US$ Million)
Figure 34. Global Plastics for Composites Market Revenue Share, By Region (2021 and 2028)
Figure 35. North America: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 36. North America: Plastics for Composites Market Revenue Share, By Type (2021 and 2028)
Figure 37. North America: Plastics for Composites Market Revenue Share, By Technology (2021 and 2028)
Figure 38. North America: Plastics for Composites Market Revenue Share, by Key Country (2021 and 2028)
Figure 39. US: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 40. Canada: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 41. Mexico: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 42. Europe: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 43. Europe: Plastics for Composites Market Revenue Share, By Type (2021 and 2028)
Figure 44. Europe: Plastics for Composites Market Revenue Share, By Technology (2021 and 2028)
Figure 45. Europe: Plastics for Composites Market Revenue Share, by Key Country (2021 and 2028)
Figure 46. Germany: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 47. France: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 48. Italy: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 49. UK: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 50. Russia: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 51. Rest of Europe: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 52. Asia Pacific: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 53. Asia Pacific: Plastics for Composites Market Revenue Share, By Type (2021 and 2028)
Figure 54. Asia Pacific: Plastics for Composites Market Revenue Share, by Technology (2021 and 2028)
Figure 55. Asia Pacific: Plastics for Composites Market Revenue Share, by Key Country (2021 and 2028)
Figure 56. Australia: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
Figure 57. China: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
Figure 58. India: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
Figure 59. Japan: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
Figure 60. South Korea: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
Figure 61. Rest of Asia Pacific: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
Figure 62. South and Central America: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 63. South and Central America: Plastics for Composites Market Revenue Share, By Type (2021 and 2028)
Figure 64. South and Central America: Plastics for Composites Market Revenue Share, by Technology (2021 and 2028)
Figure 65. South and Central America: Plastics for Composites Market Revenue Share, by Key Country (2021 and 2028)
Figure 66. Brazil: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 67. Argentina: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 68. Rest of South and Central America: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 69. Middle East and Africa: Plastics for Composites Market – Revenue and Forecast to 2028 (US$ Million)
Figure 70. Middle East and Africa: Plastics for Composites Market Revenue Share, By Type (2021 and 2028)
Figure 71. Middle East and Africa: Plastics for Composites Market Revenue Share, by Technology (2021 and 2028)
Figure 72. Middle East and Africa: Plastics for Composites Market Revenue Share, by Key Country (2021 and 2028)
Figure 73. South Africa: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
Figure 74. UAE: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
Figure 75. Saudi Arabia: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
Figure 76. Rest of Middle East and Africa: Plastics for Composites Market –Revenue and Forecast to 2028 (US$ Million)
Figure 77. Impact of COVID-19 Pandemic in North America
Figure 78. Impact of COVID-19 Pandemic in Europe
Figure 79. Impact of COVID-19 Pandemic in the Asia Pacific
Figure 80. Impact of COVID-19 Pandemic in Middle East & Africa
Figure 81. Impact of COVID-19 Pandemic in South and Central America
The List of Companies - Plastics for Composites Market
- Lanxess AG
- Covestro AG
- Celanese Corp
- INEOS Group Holdings SA
- Daicel Corp
- BASF SE
- Evonik Industries AG
- Solvay SA
- Saudi Basic Industries Corp
- Arkema SA
The Insight Partners performs research in 4 major stages: Data Collection & Secondary Research, Primary Research, Data Analysis and Data Triangulation & Final Review.
- Data Collection and Secondary Research:
As a market research and consulting firm operating from a decade, we have published many reports and advised several clients across the globe. First step for any study will start with an assessment of currently available data and insights from existing reports. Further, historical and current market information is collected from Investor Presentations, Annual Reports, SEC Filings, etc., and other information related to company’s performance and market positioning are gathered from Paid Databases (Factiva, Hoovers, and Reuters) and various other publications available in public domain.
Several associations trade associates, technical forums, institutes, societies and organizations are accessed to gain technical as well as market related insights through their publications such as research papers, blogs and press releases related to the studies are referred to get cues about the market. Further, white papers, journals, magazines, and other news articles published in the last 3 years are scrutinized and analyzed to understand the current market trends.
- Primary Research:
The primarily interview analysis comprise of data obtained from industry participants interview and answers to survey questions gathered by in-house primary team.
For primary research, interviews are conducted with industry experts/CEOs/Marketing Managers/Sales Managers/VPs/Subject Matter Experts from both demand and supply side to get a 360-degree view of the market. The primary team conducts several interviews based on the complexity of the markets to understand the various market trends and dynamics which makes research more credible and precise.
A typical research interview fulfils the following functions:
- Provides first-hand information on the market size, market trends, growth trends, competitive landscape, and outlook
- Validates and strengthens in-house secondary research findings
- Develops the analysis team’s expertise and market understanding
Primary research involves email interactions and telephone interviews for each market, category, segment, and sub-segment across geographies. The participants who typically take part in such a process include, but are not limited to:
- Industry participants: VPs, business development managers, market intelligence managers and national sales managers
- Outside experts: Valuation experts, research analysts and key opinion leaders specializing in the electronics and semiconductor industry.
Below is the breakup of our primary respondents by company, designation, and region:
Once we receive the confirmation from primary research sources or primary respondents, we finalize the base year market estimation and forecast the data as per the macroeconomic and microeconomic factors assessed during data collection.
- Data Analysis:
Once data is validated through both secondary as well as primary respondents, we finalize the market estimations by hypothesis formulation and factor analysis at regional and country level.
- 3.1 Macro-Economic Factor Analysis:
We analyse macroeconomic indicators such the gross domestic product (GDP), increase in the demand for goods and services across industries, technological advancement, regional economic growth, governmental policies, the influence of COVID-19, PEST analysis, and other aspects. This analysis aids in setting benchmarks for various nations/regions and approximating market splits. Additionally, the general trend of the aforementioned components aid in determining the market's development possibilities.
- 3.2 Country Level Data:
Various factors that are especially aligned to the country are taken into account to determine the market size for a certain area and country, including the presence of vendors, such as headquarters and offices, the country's GDP, demand patterns, and industry growth. To comprehend the market dynamics for the nation, a number of growth variables, inhibitors, application areas, and current market trends are researched. The aforementioned elements aid in determining the country's overall market's growth potential.
- 3.3 Company Profile:
The “Table of Contents” is formulated by listing and analyzing more than 25 - 30 companies operating in the market ecosystem across geographies. However, we profile only 10 companies as a standard practice in our syndicate reports. These 10 companies comprise leading, emerging, and regional players. Nonetheless, our analysis is not restricted to the 10 listed companies, we also analyze other companies present in the market to develop a holistic view and understand the prevailing trends. The “Company Profiles” section in the report covers key facts, business description, products & services, financial information, SWOT analysis, and key developments. The financial information presented is extracted from the annual reports and official documents of the publicly listed companies. Upon collecting the information for the sections of respective companies, we verify them via various primary sources and then compile the data in respective company profiles. The company level information helps us in deriving the base number as well as in forecasting the market size.
- 3.4 Developing Base Number:
Aggregation of sales statistics (2020-2022) and macro-economic factor, and other secondary and primary research insights are utilized to arrive at base number and related market shares for 2022. The data gaps are identified in this step and relevant market data is analyzed, collected from paid primary interviews or databases. On finalizing the base year market size, forecasts are developed on the basis of macro-economic, industry and market growth factors and company level analysis.
- Data Triangulation and Final Review:
The market findings and base year market size calculations are validated from supply as well as demand side. Demand side validations are based on macro-economic factor analysis and benchmarks for respective regions and countries. In case of supply side validations, revenues of major companies are estimated (in case not available) based on industry benchmark, approximate number of employees, product portfolio, and primary interviews revenues are gathered. Further revenue from target product/service segment is assessed to avoid overshooting of market statistics. In case of heavy deviations between supply and demand side values, all thes steps are repeated to achieve synchronization.
We follow an iterative model, wherein we share our research findings with Subject Matter Experts (SME’s) and Key Opinion Leaders (KOLs) until consensus view of the market is not formulated – this model negates any drastic deviation in the opinions of experts. Only validated and universally acceptable research findings are quoted in our reports.
We have important check points that we use to validate our research findings – which we call – data triangulation, where we validate the information, we generate from secondary sources with primary interviews and then we re-validate with our internal data bases and Subject matter experts. This comprehensive model enables us to deliver high quality, reliable data in shortest possible time.
Trends and growth analysis reports related to Plastics for Composites Market
Jan 2023
Construction Additives Market
Size and Forecasts (2020 - 2030), Global and Regional Share, Trend, and Growth Opportunity Analysis Report Coverage: By Type [Cement Additives, Concrete Admixtures (Precast Concrete and Ready-Mix Concrete), Paints and Coatings Additives, Adhesives and Sealants Additives, Plastic Additives, Bitumen Additives, and Others], and Application (Residential, Commercial, Infrastructure, and Others)
Jan 2023
Oil Pollution Remediation Materials Market
Size and Forecasts (2020 - 2030), Global and Regional Share, Trend, and Growth Opportunity Analysis Report Coverage: By Type [Physical Remediation (Booms, Skimmers, and Adsorbent Materials), Chemical Remediation (Dispersants and Solidifiers), Thermal Remediation, and Bioremediation]
Jan 2023
Greenhouse and Mulch Film Market
Size and Forecast (2020 - 2030), Global and Regional Share, Trends, and Growth Opportunity Analysis Report Coverage: By Product Type (Greenhouse Films and Mulch Films), Material (LLDPE, LDPE, HDPE, EVA, PHA, PVC, PC, and Others), and Application (Vegetable Farming, Horticulture, Floriculture, and Others)
Jan 2023
Plastic for SLS 3D Printing Market
Size and Forecasts (2020 - 2030), Global and Regional Share, Trends, and Growth Opportunity Analysis Report Coverage: By Type (Polyamide, Thermoplastic Polyurethane (TPU), Polyether Ether Ketone (PEEK), and Others) and End-Use Industry (Healthcare, Aerospace & Defense, Automotive, Electronics, Others)
Jan 2023
Carbon Fiber-Based SMC BMC Market
Size and Forecasts (2020 - 2030), Global and Regional Share, Trends, and Growth Opportunity Analysis Report Coverage: By Resin Type (Polyester, Vinyl Ester, Epoxy, and Others) and End-Use Industry (Automotive, Aerospace, Electrical and Electronics, Building and Construction, and Others)
Jan 2023
Thermoplastic Adhesive Films Market
Size and Forecasts (2020 - 2030), Global and Regional Share, Trends, and Growth Opportunity Analysis Report Coverage: By Material (Polyethylene, Polyamide, Thermoplastics Polyurethane, Polyester, Polypropylene, Polyolefins, Copolyamides, Copolyesters, and Others); Technology (Cast Film and Blown Film); Application (Membrane Films, Barrier Films, and Blackout Films); End Use (Textile, Automotive, Electrical and Electronics, Medical, Ballistic Protection, Lightweight Hybrid Construction, and Others)